modelspopla.blogg.se -

INSTALL SAMSUNG NVME DRIVER MANUALLY INSTALL
INSTALL SAMSUNG NVME DRIVER MANUALLY PRO
INSTALL SAMSUNG NVME DRIVER MANUALLY SERIES

It refers to setting a Port to "RST Controlled", perhaps you could verify that the this RST Controlled feature is disabled on the slot your Samsung SSD uses. "Then depending the M.2 connector you use, set the corresponding PCIe Storage Dev on Port XX item to RST Controlled." The closest I could find for your situation was referenced on page 70 in step 1.

INSTALL SAMSUNG NVME DRIVER MANUALLY INSTALL

I think I had to install the samsung software and driver first, and then the intel optane software after. Here's what device manager looks like after installing the NVMe driver. Here's the setting I flipped to allowed this. Optane memory relies on the RAID support to be enabled for PCIE. What did the trick was disabling the RAID support for the one slot that my samsung SSD was using. Intel Optane is on as the Primary SATA controller mode. I made some corrections to my answer to your question.

Thank you for your patience and understanding. We hope you find this information useful.

This issue seems to be completely related to the Samsung* magician software that does not seems to be compatible with the RST on your current configuration and we advise you to contact Samsung to get further support about this 3rd party software.

A basic requirement in order to use device acceleration with the Intel® Optane™ Memory products is to have your BIOS setup to work with RST w/ Optane support.

The Intel® Optane™ Memory products are the ones designed for this purpose and in case that you experience any problems with your product your warranty request may be denied based on your current configuration.

INSTALL SAMSUNG NVME DRIVER MANUALLY SERIES

The Intel® Optane™ SSD 800P Series 58GB, M.2 80mm PCIe 3.0, 3D Xpoint is an SSD product and you are using it out of the specs since this device was designed for storage and not to accelerate any other drive.

If we inferred correctly please review the information below:

INSTALL SAMSUNG NVME DRIVER MANUALLY PRO

Thank you for contacting Intel Technical Support.Īs we understand you are using an Intel® Optane™ SSD 800P Series 58GB, M.2 80mm PCIe 3.0, 3D Xpoint to accelerate your WD Black 4TB HDD secondary/data drive and your operating system is set up on your Samsung 970 pro 512gb and you are having issue with the Samsung* magician software at the moment that you switch from AHCI to RST w/ Optane support. Should I just deal with samsung magician not working, if I want to keep using optane memory for my secondary drive? So my question is, is it possible to use optane memory in AHCI mode? I'm not using the optane with my boot drive, only for secondary drive. I reverted it back to AHCI (using the safe mode trick so that it doesn't become unbootable) and my M.2 was recognized in samsung magician software again, and I could see the health status and firmware version of the samsung m.2. I tested the speed of the samsung ssd, and didn't notice any performance loss, however, I don't want my samsung SSD to not work properly simply because the samsung m.2 driver and samsung magician software becomes all screwy. I'm still able to boot with my samsung m.2 SSD, in RST w/ optane support mode. It's not a huge issue, but whenever I switch from AHCI to RST w/ optane support, my samsung magician software breaks and says my 970 pro is not supported. I am not pairing my optane memory with my m.2 boot drive. My mobo is the asus maximus x hero with i7 8700k cpu. I've got a Samsung 970 pro 512gb for the boot drive, and WD Black 4TB Hdd for storage, and intel optane 800p 58gb set to boost my 4tb drive. I've got an interesting dilemma that I haven't been able to find anywhere online.